Models > DV40J3000EW

DV40J3000EW ((A2-00)) Samsung Dryer

Jump to:

Find Part by Name

Diagrams for DV40J3000EW

Viewing 6 of 6

Most Popular Parts for DV40J3000EW

Viewing 12 of 73

Screw

$20.58

This is a screw and it is made for multiple appliances in your home. This model is called a sheet metal screw because it has sharp points, and the threads are closer together. This screw is designed t...

Drive Belt

$43.35

Thermistor

$28.69

Idler Pulley Assembly

$60.53

Heating Element - 5300W

$147.90

Includes the insulators and restring already attached. This dryer heating element produces heat to dry clothes in a dryer and is located in the rear end. If the heater element is burned, dryer does no...

Thermal Fuse

$24.42

Drum Support Roller & Axle

$40.38

Sold individually.

Assembly DUCT HEATER;27-DRYE

★★★★★

(1)

$191.17

High Limit Thermostat - L260-50F

$35.78

Moisture Sensor

$13.36

Assembly bracket thermostat

$41.12

Retainer Clip

$3.61

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for DV40J3000EW

Viewing 5 of 5

No heat or not enough heat

Fixed by these parts

How to fix it

Noisy

Fixed by these parts

Videos for DV40J3000EW

Viewing 8 of 8

Replacing the Drive Belt

Replacing the Idler Pulley Assembly

Replacing the Drum Support Roller & Axle

Replacing the Thermistor

Replacing the Thermal Fuse

Replacing the Assembly DUCT HEATER;27-DRYE

Replacing the Dryer Leveling Leg

Replacing the SPRING ETC-TENSION;MDE97

Installation Instructions for DV40J3000EW Provided by Fix customers like you

Viewing 3 of 25

Customer:

Christopher from SUGARLOAF, CA
Parts Used:
6602-001655
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers

The dryer turned on but the drum did not move when you pressed start even though It started it cycles.

I YouTube it and there’s a step by step process on how to do it, took maybe 30 mins. If I can so can you

19 of 30 people found this instruction helpful.

Was this instruction helpful to you?

Customer:

Noah from OXFORD, KS
Parts Used:
DC93-00634A
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Tension/Dead Man Wheel Broke/Shattered

Dryer would not start but electronics were working.

Pulled top of dryer off; noticed the belt was loose but not broken.
Went in through the back (1 screw and removed the exhaust pipe/plate); noticed the wheel was broken and thus the belt had fallen off.

Ordered replacement wheel/arm.
One screw to remove old one, one screw to install new one...tentioned the belt. Dryer was good as new.

10 of 15 people found this instruction helpful.

Was this instruction helpful to you?

Customer:

Vicky from BLOOMSBURY, NJ
Parts Used:
DC93-00634A, DC61-01228A
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

Belt fell off because of belt roller on the tensioner melted, ciezed and fell off

Watched a video on utube, how to repair my 16 month old steam dryer. The hardest part was laying on my belly holding the spring loaded tensioner and slipping the belt on around the blower housing. Only cost me $23. Winning!

8 of 10 people found this instruction helpful.

Was this instruction helpful to you?