Models
>
CDE8630H
CDE8630H Crosley Dryer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for CDE8630H
Viewing 4 of 4
Keep searches simple, eg. "belt" or "pump".
$5.42
This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the m...
In Stock
In Stock
In Stock
$1.55
Also known as the mounting clip. Holds the door switch in place on your appliance.
Special Order
In Stock
Special Order
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Anthony from New Fairfield, CT
- Parts Used:
- 53-1518
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Cracked terminal block
Killed the power, used socket set, installed new one.
Needed wire cutters and stripper, to put new terminal ring. Reconnected everything. Took about 20 minutes.
Needed wire cutters and stripper, to put new terminal ring. Reconnected everything. Took about 20 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Orient, OH
- Parts Used:
- 53-1518
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Socket set
Terminal block and power cord melted.
Removed power cord and terminal block and replaced with new ones. Still could'nt find why dryer would not run. Founed I had not hooked up one of the power wires as it had turned up so it couldnt be seen. Hooked it up and dryer runs like new. Thanks for the quick shipment.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lonnie from Soda Springs, ID
- Parts Used:
- 53-1518
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
terminel block melted
replaced the terminal block
Was this instruction helpful to you?
Thank you for voting!