Models > DH50G0

DH50G0 Whirlpool Dehumidifier

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for DH50G0

Viewing 3 of 3
Keep searches simple, eg. "belt" or "pump".
$8.04
In Stock
Order within the next 4 hrs and your part ships today!
Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".
In Stock
Order within the next 4 hrs and your part ships today!
No Longer Available
In Stock
Order within the next 4 hrs and your part ships today!
This part is used to prevent water overflow when the bucket gets full.
In Stock
Order within the next 4 hrs and your part ships today!
$276.27
This fan motor controls the circulating fan in the dehumidifier.
Special Order
Sold individually.
Special Order
$8.04
In Stock
Order within the next 4 hrs and your part ships today!
Also known as wheel or roller. This part is sold individually.
No Longer Available
No Longer Available
This fan blade attaches to the motor.
No Longer Available
No Longer Available

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
James from Silver Bay, MN
Parts Used:
WP1168670
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
The Origional Humidistat Quit Working
The knob one turns to set the humidity level was removed. The two screws holding the top on were removed. The top was lifted and swung to the side. After noting which of the two wires went where on the humidistat the wires were removed. Small flat screwdrivers were used to pry back the plastic retainers on one side of the original fai led humidistat. The new one was put in place, the two wires were reattached. The knob was replaced. The top was positioned and its two retaining screws replaced. A magnetic phillips screwdriver was handy but not necessary. Piece of cake! Someone with ten thumbs could do it!! Thanks for the prompt courteous attention to the returned erroneous part! Dealing with partselect. Com was a pleasure. . . . . . Thanks!! P. S. The dehumidifier works like new now!!
9 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
larry from tampa, FL
Parts Used:
WP1168670
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
the humidity control broke
Taking the case apart and replacing the control unit was a piece of cake. And the part arrived the very day after I ordered it.
8 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Steven from Owings Mills, MD
Parts Used:
WP1172075
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
the dehumidifier was not shutting off when water level was full
replaced a piece of the plastic at the top of the bucket that seems to be the water gauge. this seems to be fixed. we are very happy
4 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!