DRT900 ((96093001100)(2009-10)) Husqvarna Cultivator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- David from SKANDIA, MI
- Parts Used:
- 532159231
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers, Wrench set
Spring on clutch cable broke
Remove L. wheel.
Remove guard shield.
Remove old cable.
Install new cable.
Adjust throw on cable.
Put all parts back and test
Remove guard shield.
Remove old cable.
Install new cable.
Adjust throw on cable.
Put all parts back and test
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from WINSTON SALEM, NC
- Parts Used:
- 591372401
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Socket set, Wrench set
replaced old belt
took cover off and replace belt
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- richard from MECHANICSVLLE, VA
- Parts Used:
- 5324310-22, 532102134
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
broken drive axle chain
removed engine, sheet metal, handle bars, and tines. Seperated transmission case and replaced broken chain. This is not difficult it's just time consuming. A tiller repair shop would charge about $400 to do this job. It cost me $40 for a chain and gasket, Both fit perfectly, great service. Thanks
Was this instruction helpful to you?
Thank you for voting!