Models
>
RTR-646
RTR-646 Caloric Cooktop
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for RTR-646
Viewing 1 of 1Keep searches simple, eg. "belt" or "pump".
This OEM replacement part has been sourced from the manufacturer. This spark ignition module is designed for use with ranges and cooktops. The spark ignition module works to provide the spark require...
No Longer Available
In Stock
Order within the next 52 mins and your part ships today!
This switch is used with gas ranges and ovens. The part sits on top of the valve. Once the knob is turned it will create a spark that will light the gas and starts the burner.
No Longer Available
$14.09
This is a genuine OEM replacement part. This screw is commonly used in the assembly of ranges, refrigerators, cooktops, air conditioners, wall ovens, dryers, microwave oven combos, microwaves, and was...
In Stock
Order within the next 52 mins and your part ships today!
This square gas burner grate has sides measuring just over eight inches. This burner is made of square wire and is black in color.
No Longer Available
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for RTR-646
Viewing 3 of 3Will Not Start
Fixed by these parts
How to fix it
Gas igniter glows, but will not light
Fixed by these parts
How to fix it
Element will not heat
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- John from Alexandria, VA
- Parts Used:
- 32020101
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
2 of 4 burners wouldn't light
Unplugged the stove, removed all 4 burner discs from the stove top (2 screws each) and disconnecting electrode wires as I pulled them out, removed the stove top, unscrewed the old module, removed the 6 wires, connected wires to the new module, screwed it into place, reinstalled the top while poking the electrode wires through the top one
... Read more
by one, put the stove top in place, connected the wires to the burner discs. Done, and it works! It took longer to find and order the part than it did to change it out.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Frederick from Eagle, WI
- Parts Used:
- 32020101
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Spark did not ignite one burner and sometimes two
I could not figure out how to get to the igniter until I went to the "Part Select" web site and found a post that was exactly like the problem that I had. IE: Remove two screws holding each burner, Lift off top, remove old igniter being "Carefull" not to mix up the wires when putting them on the new one, installed new igniter in bracket a
... Read more
nd mounted in position, Reinstalled top and PRESTO - it worked. First post was VERY HELPFUL. Thank you
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- mary from saxonburg, PA
- Parts Used:
- WP305810B
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
just wanted new stove top grates
opened package and put grates in place
Was this instruction helpful to you?
Thank you for voting!