Models > 243-685-307

243-685-307 (1993) MTD Chipper Shredder

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 243-685-307

Viewing 2 of 2
Page A Diagram and Parts List for 1993 MTD Chipper Shredder
Page A
Page B Diagram and Parts List for 1993 MTD Chipper Shredder
Page B
Keep searches simple, eg. "belt" or "pump".
Lawn Mower Ground Drive Belt – Part Number: 954-04032B
$26.85
This is a drive belt and it is used on various outdoor lawn equipment. This part is made of rubber and is sold individually. It measures to be 35.80 inches by 0.5 inches. This part drives the transmis...
In Stock
Fl. Bearing – Part Number: 741-0487C
$7.91
This is a flange bearing for your lawn and garden equipment. It is a bearing contained inside a housing unit that provides a strong and secure position, while still allowing the bearing within to rota...
In Stock
Bell. Wash. .340 I.D. x .872 O.D. – Part Number: 736-0242
$4.32
This is a Belleville washer, and it is used with various lawn and garden equipment around your home. This part has an inner diameter of 0.340 inches and an outer diameter of 0.872 inches. The convex s...
In Stock
Washer-Lock 5/16 – Part Number: 936-0119
$4.95
This lock washer is used to resist the loosening of bolted joints. Repair tip: It is difficult to install the lock washer in a tight place or when the bolt/screw is pointing down. This lock works with...
In Stock
Fl-Wash. (Hardened) – Part Number: 736-0187
$4.63
Special Order
Hex Wash. Hd. Self-Tap Scr. – Part Number: 710-0726
$4.40
In Stock
Carriage Bolt, 5/16-18 X .62" Lg. – Part Number: 710-0260A
$4.27
In Stock
Hex Screw, 5/16-24 X .750 – Part Number: 710-0627
No Longer Available
3-Arm Thumb Scr. 5/16-18 x .75" Lg. – Part Number: 720-0170
$11.34
In Stock
Hex Bolt 5/16-18 x .75" Lg. – Part Number: 710-3008
$4.33
In Stock
Grease Benalene 920 8 Oz – Part Number: 737-0300A
$34.97
In Stock
Hex Flange Bearing Bronze .625" I.D. – Part Number: 948-0227A
$8.77
In Stock
View More

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
LISA M from BATESVILLE, AR
Parts Used:
737-0300A
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Mixer began to make a noise on speed two and higher
We took our 30 plus year mixer apart. I removed the old grease. There was some crumbly looking grease in the main housing gear section where the nylon gear is located. It looked like it had flour mixed in it. Not certain. Removed as best possible all old grease and applied 6 oz. of new Benalene grease to all of the gears. Now it do es not make the slight howl sound.
Read less
5 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More