Models
>
CS-3000
CS-3000 (Type 1E -After S/N 001001) Echo Chainsaw
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for CS-3000
Viewing 8 of 8_(After_SN_001001)_WW_1.gif "Page A Diagram and Parts List for Type 1E -After S/N 001001 Echo Chainsaw")
_(After_SN_001001)_WW_2.gif "Page B Diagram and Parts List for Type 1E -After S/N 001001 Echo Chainsaw")
_(After_SN_001001)_WW_3.gif "Page C Diagram and Parts List for Type 1E -After S/N 001001 Echo Chainsaw")
_(After_SN_001001)_WW_4.gif "Page D Diagram and Parts List for Type 1E -After S/N 001001 Echo Chainsaw")
_(After_SN_001001)_WW_5.gif "Page E Diagram and Parts List for Type 1E -After S/N 001001 Echo Chainsaw")
_(After_SN_001001)_WW_6.gif "Page F Diagram and Parts List for Type 1E -After S/N 001001 Echo Chainsaw")
_(After_SN_001001)_WW_7.gif "Page G Diagram and Parts List for Type 1E -After S/N 001001 Echo Chainsaw")
_(After_SN_001001)_WW_8.gif "Page H Diagram and Parts List for Type 1E -After S/N 001001 Echo Chainsaw")
Keep searches simple, eg. "belt" or "pump".
$5.36
This is a single OEM fuel filter that has been approved by the manufacturer, ensuring the highest quality. It is compatible with numerous types of outdoor power equipment, such as blowers, trimmers, e...
In Stock
$7.63
This check valve or the fuel tank vent is connected to the fuel tank in the following products: hedge trimmer, leaf blower/vacuum, chainsaw, edger, engine, tiler, auger, water pump, chipper shredder, ...
In Stock
In Stock
$4.99
This is an authentic OEM replacement flange nut, sold as an individual part. It is compatible with various types of equipment and is used to secure components, such as a guide bar cover, sprocket guar...
In Stock
$4.99
This part is the replacement stud for your chainsaw. It is approximately 1 ¼ inches long and is black in color. The stud secures the chain bar to the chainsaw. It the stud is damaged or missing, it ca...
In Stock
$11.08
This is a single air filter for a chainsaw. It is sourced right from the original manufacturer, ensuring the exact fit for your equipment. The air filter is essential in protecting the engine, as it f...
In Stock
$4.99
This is a clip for a variety of lawn and garden equipment. The clip is made of a durable metal, and is 6.5mm in diameter. This part is most commonly used to clamp tubes and hoses in place. The clip is sold individually.
In Stock
$5.19
This is a cap for a chainsaw fuel tank. Its purpose is to seal the fuel tank and stop gas from leaking. The retainer stays inside the tank and ensures the cap stays connected and does not get lost. It...
In Stock
In Stock
In Stock
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Richard from SPRING HILL, FL
- Parts Used:
- 12318139130
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Bulb was worn out and broken open
The unit is a press fit. To remove the old one required breaking the plastic compression tabs that hold it in place. That was simple enough. Replacing requires lining up in the correct position to meet the inner hose. Then push it in. The compression tabs on the replacement click in and hold.in place.
Was this instruction helpful to you?
Thank you for voting!