Models
>
CS-355T
CS-355T ((C33414001001-C33414999999)) Echo Chainsaw
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
$23.64
This OEM Echo tune-up kit contains a fuel filter, air filter, and spark plug. Routine maintenance is a quick job, but it is important. These parts are designed to fit your chainsaw, and they ensure yo...
In Stock
$3.99
Replacing the spark plug should be part of your regular maintenance. How often to replace it depends on your model but is generally changed at least once a year or more, depending on use. When a spark...
In Stock
In Stock
$7.72
This is a bevel gear, also referred to as a drive gear or tension gear, and is used in chainsaws. This authentically sourced part is sold individually. It is part of the chain tensioning assembly, aid...
In Stock
$4.99
The nut flange is part of the chain brake and is fastened onto the sprocket guard. It is sold individually, however, your equipment likely has a couple of these. If the housing cracks, this could caus...
In Stock
$7.72
This is a single bevel gear for a chainsaw. Your chainsaw has two bevel gears that allow you to adjust the chain tension. One has a post with a slot in it (for a screwdriver), which mates to a second ...
In Stock
$4.99
This is a clip for a variety of lawn and garden equipment. The clip is made of a durable metal, and is 6.5mm in diameter. This part is most commonly used to clamp tubes and hoses in place. The clip is sold individually.
In Stock
$4.99
This is an OEM quality chain tensioner for a chainsaw. This part is attached to the adjustment screw and fits into an opening on the bar. When you turn the adjuster it moves the tensioner, which eithe...
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Richard from SPRING HILL, FL
- Parts Used:
- 12318139130
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
Bulb was worn out and broken open
The unit is a press fit. To remove the old one required breaking the plastic compression tabs that hold it in place. That was simple enough. Replacing requires lining up in the correct position to meet the inner hose. Then push it in. The compression tabs on the replacement click in and hold.in place.
Was this instruction helpful to you?
Thank you for voting!