Models
>
PNSF31Z01
PNSF31Z01 General Electric Water Softener
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for PNSF31Z01
Viewing 2 of 2Keep searches simple, eg. "belt" or "pump".
In Stock
Order within the next 9 hrs and your part ships today!
Special Order
In Stock
Order within the next 9 hrs and your part ships today!
Used with Water Softeners.
This motor has a timer that allows the water softener to go through its various cycles.
No Longer Available
In Stock
Order within the next 9 hrs and your part ships today!
In Stock
Order within the next 9 hrs and your part ships today!
In Stock
Order within the next 9 hrs and your part ships today!
In Stock
Order within the next 9 hrs and your part ships today!
In Stock
Order within the next 9 hrs and your part ships today!
In Stock
Order within the next 9 hrs and your part ships today!
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for PNSF31Z01
Viewing 1 of 1Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- edward from perkasie, PA
- Parts Used:
- WS60X10004, WS22X10065
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers, Wrench (Adjustable)
watersoftener was leaking at the union of the manifold and the unit
water softener was leaking due to a broken clip. turned off water and drained the pipes. some how managed to remove the broken clip from the inlet side. i than was able to remove the good clip from the outlet side, without breaking it. i replaced the washer on the leaking side, cleaned and resealed all the joints. finally i reattached the
... Read more
manifold to the water softener. no leaks so far. next time i will discarge the unit before repair.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- jeff from lombard, IL
- Parts Used:
- WS26X10011
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
Broken gear box on motor
Very fast and easy.
Thank you for the quick shipping.
Wife very happy the water softener was back in action in 2 days.
Thank you for the quick shipping.
Wife very happy the water softener was back in action in 2 days.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mike from Princeton, MN
- Parts Used:
- WS26X10011
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
water softener would continually rinse but not shut off
I removed three screws that held the motor assembly in and unhooked two wires.
Was this instruction helpful to you?
Thank you for voting!