Models > DMO24

DMO24 Dacor Microwave

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Glass Cooking Tray – Part Number: 66344
No Longer Available
Belt Drive Motor Kit with Capacitor – Part Number: 285222
This two-speed motor performs 1725 revolutions per minute in one speed, and 1140 revolutions per minute in the other speed. It runs at 1/2 horsepower and carries 115 volts.
No Longer Available
WAVE GUIDE COVER – Part Number: 86828
No Longer Available
Oven Lamp – Part Number: 76233
This oven lamp is temperature rated to be placed inside your oven and illuminate when the door is open. Please consult proper instructions when installing.
No Longer Available
SVC-LATCH SPRING;86786,PMOR30B – Part Number: DE81-09672A
$4.89
In Stock
Order within the next 6 mins and your part ships today!
SVC-FOOT;66862,DMT2420SG – Part Number: DE81-10430A
$36.53
Special Order
MAGNETRON TEMP FUSE – Part Number: 86794
No Longer Available
HIGH VOLTAGE CAPACITOR – Part Number: 86921
No Longer Available
SVC-SEALER FILM;86788,DMO24B – Part Number: DE81-09925A
$32.12
Special Order
FAN MOTOR – Part Number: 86805
No Longer Available
SVC-LATCH HOOK SCREW;86820,MMD30B – Part Number: DE81-08378A
$8.90
Special Order
CONTROL PANEL ASY-BLK – Part Number: 86757B
No Longer Available
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for DMO24

Viewing 1 of 1
Door stuck closed
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Andrew from HATTIESBURG, MS
Parts Used:
285222
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
It was the heat safety switch in the old drive motor
It was fairly easy a few tight spaces to reach in but all in all it was pretty straight forward
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Roger from Millis, MA
Parts Used:
285222
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Wrench set
Washer Had A Continuous Moan And Vibration
I disconnected the drive belt from the motor and ran the motor to isolate it from the rest of the mechanisms. This was the noise. I disconnected the water lines and electrical cord,laid the machine front down. I disconnected the motor plug,removed the two bracket to body bolts and lifted the motor out to the bench. I then transferred th e bracket to the new motor and reversed the procedure to install the motor. The most difficult part was raising the machine back up alone,I suggest a helper.
Read less
Was this instruction helpful to you?
Thank you for voting!
View More