OEM Chapin Sprayer Parts & Accessories

Pump Assembly

$50.29

Fix Number: FIX17016815
Manufacturer Part Number: 6-4609

Pump Assembly

Brass Fan Tip Nozzle .5GPM Female

$14.61

Fix Number: FIX10290354
Manufacturer Part Number: 6-5797

This is a genuine Chapin replacement part. This is a brass fan tip nozzle, which sprays .5 gallons per minute. This durable nozzle is a female attachment that comes with an adaptor. The nozzle and adaptor are made of brass, and the o-ring is made of plastic. To install the nozzle, and the adaptor if needed, twist each part onto the end of the extension wand, ensure it is attached securely before using the sprayer.

Shut Off Assembly

$31.13

Fix Number: FIX10290391
Manufacturer Part Number: 6-8138

Nozzle Assembly

$43.58

Fix Number: FIX10290387
Manufacturer Part Number: 6-8131

Cone Pattern Nozzle

$15.09

Fix Number: FIX10290278
Manufacturer Part Number: 3-1802

Shut Off Assembly

$14.54

★★★★★

1 Review

Fix Number: FIX10290329
Manufacturer Part Number: 6-2000

This is a genuine Chapin replacement part. The shut off assembly is found at the end of the spray hose, if you are using a sprayer extension it is the link between the extension and the spray hose. The shut off assembly controls the flow of liquid from the tank, through the hose, and out of the nozzle. The shut off assembly easily disconnects for cleaning and repair, meaning you can clean out clogs, remove dirt and debris from the sprayer hose, and extend the life of your sprayer. This Chapin shut off assembly replacement is made of plastic. Before use ensure all connections are tight, so the tank will maintain pressure.

Brass Adjust Nozzle

$18.67

Fix Number: FIX10290384
Manufacturer Part Number: 6-8122

This is a genuine Chapin replacement part. This two piece brass adjustable cone nozzle fits most Chapin XP ProSeries sprayers. This durable two-piece cone nozzle is twist adjustable. The nozzle has two parts, one is a brass nozzle, and the other is polyethylene and has a Viton o-ring. To install this part first attached the polyethylene nozzle to the sprayer, and then thread the brass nozzle on top of that. Ensure all attachments are securely fashioned to help avoid leaks and loss of pressure.