Carbon Brush Set CB-441
- Fix Number:
- FIX10156663
- Manufacturer #:
- CB441
- Manufactured by:
- Makita
- Product Description
- This is a set of two carbon brushes. The carbon brushes should be checked on a regular basis. If they have worn down to the limit mark, it is time for a replacement. Both carbon brushes need to be replaced at the same time. For this repair use your screwdriver to detach the brush holder caps, remove the old carbon brushes, and insert the new ones. Fasten the new carbon brushes to the holder caps. To break in the new carbon brushes, run the tool with no load for about one minute.
- Works with the following brands:
- Makita
- Works with the following products
- Saw, Drill, Circular Saw, Hammer
- Part# CB441 replaces these:
- 94435-6C, CB-441
Product Description
This is a set of two carbon brushes. The carbon brushes should be checked on a regular basis. If they have worn down to the limit mark, it is time for a replacement. Both carbon brushes need to be replaced at the same time. For this repair use your screwdriver to detach the brush holder caps, remove the old carbon brushes, and insert the new ones. Fasten the new carbon brushes to the holder caps. To break in the new carbon brushes, run the tool with no load for about one minute.
-
Works with the following brands:Makita
-
Works with the following products:Saw, Drill, Circular Saw, Hammer
-
Part# CB441 replaces these:94435-6C, CB-441
Questions and Answers
Be the first to ask our experts a question about this part!
Related Parts Additional or alternate parts to consider.
Model Compatibility
Manufacturer Part Number: CB441
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.