Models > MDB4949SHZ0

MDB4949SHZ0 Whirlpool Dishwasher

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Lower Dishrack Wheel – Part Number: W10195416
$46.13
This OEM gray plastic lower dishrack wheel assembly allows the rack to slide in and out of the dishwasher with ease. It measures roughly 3 by 6 inches. If it breaks or becomes damaged it may make slid...
In Stock
Side Mounting Bracket Kit – Part Number: 8212560
$18.69
This mounting kit can be used on solid surface countertops.
In Stock
SEAL – Part Number: W10909089
$64.13
In Stock
Power Cord Kit – Part Number: 4317824
$26.92
Includes power cord and all necessary parts needed for complete installation of cord.
In Stock
HOSE – Part Number: W10445975
$73.26
In Stock
Gasket – Part Number: WP8531743
$42.58
Also known as a washer.
In Stock
CLAMP – Part Number: W10789434
$10.77
In Stock
Tub Sound Shield - Insulation – Part Number: W11086533
$26.25
In Stock
Door Handle - Stainless Steel – Part Number: W10195738A
$48.23
Screws are included.
In Stock
Screw – Part Number: WP3400074
$5.37
This screw is sold individually.
Special Order
ARM-SPRAY – Part Number: W10803178
$192.88
In Stock
Lever – Part Number: WPW10195037
$7.42
In Stock
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for MDB4949SHZ0

Viewing 7 of 7
Leaking
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Not cleaning dishes properly
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Door won’t close
Fixed by these parts
Fixing
How to fix it
Noisy
Fixed by these parts
Fixing Fixing
How to fix it
Will Not Start
Fixed by these parts
Fixing Fixing
How to fix it
Door latch failure
Fixed by these parts
Fixing
How to fix it
Will not fill with water
Fixed by these parts
Fixing
How to fix it
Replacing the Lower Dishrack Wheel

Replacing the Lower Dishrack Wheel

Replacing the Gasket

Replacing the Gasket

Replacing the Side Mounting Bracket Kit

Replacing the Side Mounting Bracket Kit

Replacing the HOSE

Replacing the HOSE

Replacing the Lever

Replacing the Lever

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Thomas from WEST OLIVE, MI
Parts Used:
W10195416
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Broken wheel unit on the bottom dish rack
All you do is pop out the old wheel unit at two (2) points on the plastic wheel housing and pop in the new one. Easy fix. Less than a 5 minute fix.
92 of 106 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dennis from OAKWOOD, IL
Parts Used:
W10195416
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Wheel on lower shelf broke off
Simply snap the old one off and snap the new one on. Simple as that less than 15 seconds.
30 of 36 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Paul from HGHLNDS RANCH, CO
Parts Used:
W10909089
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Dishwasher door leaking
First off, this part does not look like a seal. It seems more like a trim piece. It is the only part along the bottom of the DW door so it is indeed a seal, and the DW was leaking after I replaced the seal around the tub and the door. First take off the inner panel of the door by removing the Torx screws on the edge and the hinges. Pay at tention to which hole each screw came out because they are different lengths. Gently separate the inner panel being careful with the wires going to the detergent dispenser. The seal is held on by 5 small hex head screws on the bottom of the door panel. Remove the old one and install the new one. Put the door panel back together and on the hinges. Good luck.
Read less
21 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More