The lid latch is a safety feature found in your washer. Its purpose is to stop the machine from spinning when the lid is opened. You may need to replace the lid latch assembly if your washer will not ...
In Stock
Order within the next 7 hrs and your part ships today!
The suspension rods help to keep the tub in your washing machine stable and secure while cycling through your laundry. If your washer is excessively vibrating, moving around, or very loud when operati...
In Stock
Order within the next 7 hrs and your part ships today!
The washer drive pulley kit is also known as a replacement clutch assembly, or a cam kit. The drive pulley is found at the bottom of your washing machine, mounted to the drive shaft. Common symptoms i...
In Stock
Order within the next 7 hrs and your part ships today!
The drive belt works with the pulley in your washer in order to spin the tub. If you notice a burning rubber smell, your washer has become excessively noisy, or it will not spin, it could indicate an ...
In Stock
Order within the next 7 hrs and your part ships today!
This tub centering spring is a genuine OEM replacement part for your washing machine. If your washer is noisy or excessively shaking while it is operating, you may need to replace the springs. The met...
In Stock
Order within the next 7 hrs and your part ships today!
This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the m...
In Stock
Order within the next 7 hrs and your part ships today!
If your washing machine is shaking, noisy, or moves while operating, you may need to replace the suspension rod supports. These supports are used to secure the suspension rods, which help ensure that ...
In Stock
Order within the next 7 hrs and your part ships today!
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
In Stock
Order within the next 7 hrs and your part ships today!
This part changes the transmission from agitation to spin mode. This actuator is for washers.
Actuator shifts the splutch and monitors the position of the splutch.
In Stock
Order within the next 7 hrs and your part ships today!
This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
In Stock
Order within the next 7 hrs and your part ships today!
This insert is sold individually. Knob not included. Knob is sold separately.
In Stock
Order within the next 7 hrs and your part ships today!
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Carl
January 26, 2022
How do i tell if the suspension rods are bad?
For model number NTW4650YQ0
Hi Carl,
Thank you for your question. If the suspension rods on your washer are bad, then your washer will shake and vibrate. You will also need to inspect them visually for signs of damage and wear. If they show any of these signs, they will need to be replaced. The part number listed under your model number for the suspension rod kit is PS11703290. If you would like to place an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
How far down is the tub from the top cover. The tub looks like its down 1 1/2 inches, it gets severely out of balance when spinning.
For model number NTW4650YQ0
Hello Carl, Thank you for the question. The 1.5" Gap is normal. We suggest inspecting the Washing Machine Suspension Rods for wear or damage. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
The washer isn’t going into spin after pumping out the water. How do distinguish what the problem is so I don’t have to order several parts. I see it could be a couple of different problems. The shift actuator or lid latch or ??? Please help, Thanks
For model number NTW4650YQ0
Hello Dave, thank you for the question. Based on our research, the issue is probably due to the shift actuator, part number FIX11747977. We hope this helps!
A detailed Service Technician Service Manual is hidden inside the machine on the front panel. It is hidden by the bleach dispenser input. It gives a list of fault codes and instructions for calibration after repair, resetting fault codes, and a manual test mode for stepping the machine through each mode on command. The Tachometer faile
... Read mored which would not let the machine come up to maximum spin speed. The tachometer is part of the solenoid actuator that shifts the transmission. It is not specifically called out in the manual. Any failure causes the lid lock light to blink which gives the appearance of a lid lock failure
The instructions that came with the part were worthless. Essentially, unplug, put in new part, plug it back in. I spent a considerable amount of time on the internet and finally found a video showing how to open the top. Unlike other models, it is held down by clamps in the back rather than clips in the front. Once finding this inform
... Read moreation the installation was simple. Remove the clamps and the back of the console, slide the top forward and lift, remove and replace the lock and reassemble. You don't even have to remove the hoses.